Buchan Electrical
Service

House rewiring in Wangaratta and surrounding country areas.

In a full rewire we replace every single cable in the house, light cables and power cables, and bring the switchboard up to the current standard. Most of the time there is no damage to your walls, and your family can stay in the house while we work.

An electrician working in a roof space with a headlamp

100+

full-house rewires over the last 26 years

1-4

days for a house, depending on the house and the crew

Certificate

of Electrical Safety at the end, good for insurance

What a full rewire includes

  1. 1

    We talk with the power company, and install new overhead mains where required: the new mains box and mains cables, with the power company bringing the supply to the house

  2. 2

    New meter panels or switchboards as needed

  3. 3

    All safety switches and circuit breaker main switches to the current standard

  4. 4

    Every cable in the house replaced, all the light cables and all the power cables

  5. 5

    The old conduits and cables taken out of the roof as well, unless you ask us not to, so no old cables are left lying around

Does my house need rewiring?

  1. 1

    Overloaded circuits that keep tripping. The best way to check is to have an electrician look

  2. 2

    Old rubber-insulated cables that have perished, where one movement of the cable and the insulation falls off

  3. 3

    Power points with no earth, which is why testing power points and checking the wires matters

  4. 4

    Older PVC cables that have gone brittle

  5. 5

    Old split steel conduits with fabric-sheathed wires in them

How we tell

A glance in the roof can usually tell us if the lights need redoing, and taking off a few power points tells us about the rest. The switchboard alone does not always show it, because new tails of cable are sometimes run up into the roof to join under the old wires. Before we quote we do a visual check in the roof, of the switchboard and behind power points, and some random testing of power points. We can also carry out an insulation test to check the quality of the insulation.

Buying an old house?

Get us to come and do an electrical check. If we cannot get into the roof, we work out how, and we will not write on the report that we could not get in. If we cannot get under the house, we at least get photos under there and make sure we do the visual checks to see what is required.

Little or no damage to your walls

Generally we do not need to damage any walls to rewire. The only time you may see damage on a ceiling is when going from a really big light fitting with lots of screws to a small one. If there is any possible damage, we talk about it before it happens, including who patches the wall: we can, you can arrange someone, or you can do it yourself. Even where people think it is not possible to get under the house, we find a way.

Staying in the house

Yes, your family can stay at home while we work. We aim to get the lights rewired on the first day. If we cannot get everything back on at once, we leave you with lights working in most of the house, or at least the living areas. Depending on the house and the crew, a rewire takes between one and four days, and we work with you so the power is on when you need it at night.

Tidy every day, and at the end

If we leave tools on site, they go in one pile at the end of each day. We clean up the rooms we have finished, and talk with you about which rooms need to be usable for the night. At the end we sweep up, vacuum if you would like, take away all the rubbish, and recycle the old cable and steel conduit. Then we carry out our polarity, continuity and insulation tests, and give you a Certificate of Electrical Safety, so you can be confident it has been done correctly and is good for insurance.

Old switches and heritage rewiring

If you have old Bakelite switches you would like to keep and they are in good condition, we can reuse them and clean them up. Bakelite polishes up nicely with methylated spirits. We can fix up and re-grease roller switches, and over-centre switches are usually in good shape. If you need to match in an odd switch, we carry a stock of old switches we have salvaged from other jobs. We are happy to do heritage rewiring.

Thinking ahead

Worth asking us about: future-proofing. What circuits might you need in future? It is easier to plan for them now than to add them later.

A real job

A Federation house in Rutherglen.

One of the rewires we remember best was a really old Federation house in Rutherglen, with red pine doors and architraves and old Bakelite switches. We spent five days on it in the middle of summer. It was a good job. We have done more than 100 full-house rewires in 26 years, and we still enjoy the old ones.

Questions about house rewiring in Wangaratta.

How do I know if my house needs rewiring?

Overloaded circuits that keep tripping, old rubber-insulated cables that have perished, power points with no earth, brittle older PVC cables, and old split steel conduits with fabric-sheathed wires are all signs. The best way to check is to have an electrician look. A glance in the roof usually tells us if the lights need redoing, and taking off a few power points tells us about the rest.

Will you damage my walls and ceilings?

Generally we do not need to damage any walls to rewire. The only time you may see damage on a ceiling is going from a really big light fitting with lots of screws to a small one. If there is any possible damage, we talk about it before it happens, including who patches the wall.

Can we stay in the house while you work?

Yes. We aim to get the lights rewired on the first day. If we cannot get everything back on at once, we leave you with lights working in most of the house, or at least the living areas.

How long does a rewire take?

Depending on the house and the crew, between one and four days.

Do you take out the old wiring?

Yes. When we replace split steel conduits or rubber-sheathed cables in the roof, we take them out as well, unless you ask us not to, so no old cables are left lying around.

Will I get a certificate?

Yes. We carry out polarity, continuity and insulation tests, and give you a Certificate of Electrical Safety, so you can be confident it has been done correctly and is good for insurance.

Should I have an electrical check before buying an old house?

Yes. If we cannot get into the roof, we work out how, and we will not write on the report that we could not get in. If we cannot get under the house, we at least get photos and make sure we do the visual checks.

Electrical work in Victoria is regulated by Energy Safe Victoria. Buchan Electrical is a Registered Electrical Contractor, #16499.

Buchan Electrical

Get a free quote

Tell Lachlan what needs doing and where. Text is best: he will always reply.

Free quote

Get a free quote

Fill in the form and Lachlan will be in touch to discuss your job. Or call Lachlan on 0439 688 999.

Call 0439 688 999

Text is best: Lachlan will always reply. We only use your details to quote this job.